Skip to content

Gold Wire-Wrapped Earrings Feature Dazzling Iridescent Teardrop Crystals and Intricate Beadwork

ac3ca25e-75b3-4c30-aef4-ee902fbd83c9

Materials Used:

  1. Wire: Gold-colored wire (likely 20-24 gauge for the wrapping and 18-20 gauge for the frame).
  2. Beads:
    • Faceted Teardrop Crystal Beads (Iridescent, multicolor).
    • Small Gold Spacer Beads (likely 2mm or 3mm).
  3. Ear Hooks: Gold-plated or gold-filled hooks with embedded rhinestones.
  4. Jump Rings: Small gold jump rings to connect the components.
  5. Jewelry Tools:
    • Round-nose pliers
    • Flat-nose pliers
    • Wire cutters

Step-by-Step Procedure:

Step 1: Create the Frame

  • Cut a piece of thicker wire (18-20 gauge), about 2-3 inches long.
  • Shape it into a teardrop frame using round-nose pliers.
  • Use flat-nose pliers to ensure both ends meet at the top.

Step 2: Wire Wrapping Around the Frame

  • Cut a long piece of thinner wire (24-26 gauge).
  • Start wrapping it around the teardrop frame, securing it tightly.
  • Add small gold spacer beads as you wrap to create a decorative border.
  • Continue wrapping until you complete the entire frame.

Step 3: Attach the Center Crystal

  • Thread the faceted teardrop crystal bead onto a thin wire.
  • Secure it at the center of the frame using a wire-wrapping technique.
  • Wrap the ends of the wire neatly around the frame to keep the crystal in place.

Step 4: Add the Jump Ring and Ear Hook

  • Attach a small jump ring at the top of the teardrop frame.
  • Connect the gold-plated ear hook through the jump ring.
  • Ensure all connections are secure and the wire ends are tucked in properly.

Step 5: Final Adjustments

  • Check for sharp edges and trim excess wire.
  • Adjust the shape slightly if needed.
  • Polish the earring with a soft cloth for a shiny finish.